Double vibration for block making machines

Double Vibration of block making machines

Since few years ago ROMETA has dual vibration running for their bloqueras 2050 and above. Is a 4-axis vibration vibrators 2 to 2. We have a vibration to fill, with two axes, and a single engine. And stronger vibration for compression with two axles and two motor vibrators. It incorporates design cardans Rometa, you have almost no maintenance, no belts. This system allows us to make a homogeneous completely filled, and the rapid compression cycles reaching 12 seconds, according piece and aggregates. Aided by a variable speed drive to vary the force part can vary the speed of the vibration of filling or compression

  • The rotation and translation is simultaneous, to reduce the cycle time, achieving reductions between 15 and 20% of the standard finger car.
  • Manufactured aggregates with which you can manufacture slabs, fences and channels of different types and with different techniques for the creation of concrete.
  • The drying of the pieces can become as important as their manufacture, therefore, we believe that it is essential that you have a drying area for the concrete pieces in your factory
  • In this part, we will talk about the importance of humification after drying 24 hours before palletizing.
  • In this part, we offer the reasons why we believe you need a laboratory (forlab) from Rometa in your factory, advising them on what and how to do it
    ROMETA incorporates components from leading brands known worldwide in electrical and hydraulic equipment.
    Our company is certified in accordance to standard UNE-EN ISO 9001:2015 and our facilities meet the safety requirements of European Directive EEC 2006/42 / C.