Sheet Metal low mold

In Rometa models 2030 2050 4050.

It is possible to manufacture parts of sheet metal. This system is used to extend the life of wooden trays, which only serve to transport the piece but does not vibrate directly against the mold tray.

This system places a tray of iron between tray mold for their manufacture, and before demoulding, the plate is removed. Admittedly, the machine cycle is elongated, but assure a better finish of the workpiece.

  • The rotation and translation is simultaneous, to reduce the cycle time, achieving reductions between 15 and 20% of the standard finger car.
  • Manufactured aggregates with which you can manufacture slabs, fences and channels of different types and with different techniques for the creation of concrete.
  • The drying of the pieces can become as important as their manufacture, therefore, we believe that it is essential that you have a drying area for the concrete pieces in your factory
  • In this part, we will talk about the importance of humification after drying 24 hours before palletizing.
  • In this part, we offer the reasons why we believe you need a laboratory (forlab) from Rometa in your factory, advising them on what and how to do it
    ROMETA incorporates components from leading brands known worldwide in electrical and hydraulic equipment.
    Our company is certified in accordance to standard UNE-EN ISO 9001:2015 and our facilities meet the safety requirements of European Directive EEC 2006/42 / C.