Technical Blog

Installation circulating molds concrete

Circulating molds

There are many parts that can be manufactured with no instant release as blocks or pavers.

Need a lot of molds, and the molds are circulating. We carry out the filling, and molds automatically circulate to the drying zone, natural drying or steam, to return to the manufacturing area.

Being demolded, cleaned, greased, and return to start



Installation circulating molds concrete Installation circulating molds concreteInstallation circulating molds concrete

Installation circulating molds concrete

  • The rotation and translation is simultaneous, to reduce the cycle time, achieving reductions between 15 and 20% of the standard finger car.
  • Manufactured aggregates with which you can manufacture slabs, fences and channels of different types and with different techniques for the creation of concrete.
  • The drying of the pieces can become as important as their manufacture, therefore, we believe that it is essential that you have a drying area for the concrete pieces in your factory
  • In this part, we will talk about the importance of humification after drying 24 hours before palletizing.
  • In this part, we offer the reasons why we believe you need a laboratory (forlab) from Rometa in your factory, advising them on what and how to do it
    ROMETA incorporates components from leading brands known worldwide in electrical and hydraulic equipment.
    Our company is certified in accordance to standard UNE-EN ISO 9001:2015 and our facilities meet the safety requirements of European Directive EEC 2006/42 / C.