Quality parts


The main features of the pieces:
• Fineness of faces. It depends mainly on having a fine aggregates. Depending on the application we need a different size aggregate.
• Density of the part (weight). It depends on the vibration of the machine, as aggregates (quarry or river), many cement.
• Accuracy of measurements of the pieces. Depends on the quality of the machine.
• Isolation térmico.Depende aggregates used and the density of the part and mold design

It is very important to select good aggregate, analyze, aggregate, both in size and quantity of dust, ... A good mix guarantees a good piece.

According to the parameters of the machine, with a block of 40 x 20, resistors can reach 80 tons.

The machine can adjust the filling, vibration, rocking, compression. We have all the tools to achieve the desired quality.

  • The rotation and translation is simultaneous, to reduce the cycle time, achieving reductions between 15 and 20% of the standard finger car.
  • Manufactured aggregates with which you can manufacture slabs, fences and channels of different types and with different techniques for the creation of concrete.
  • The drying of the pieces can become as important as their manufacture, therefore, we believe that it is essential that you have a drying area for the concrete pieces in your factory
  • In this part, we will talk about the importance of humification after drying 24 hours before palletizing.
  • In this part, we offer the reasons why we believe you need a laboratory (forlab) from Rometa in your factory, advising them on what and how to do it
    ROMETA incorporates components from leading brands known worldwide in electrical and hydraulic equipment.
    Our company is certified in accordance to standard UNE-EN ISO 9001:2015 and our facilities meet the safety requirements of European Directive EEC 2006/42 / C.