Who makes the molds? And Trays


Rometa supplied molds, although you can use molds made in the area, with the general measures taken by Rometa Machine.

Rometa works with molds of different countries, Spain, France, Italy, Germany, by type and customer needs.

Pavers molds of slabs, hollow blocks,kerbstones, curbs, walls, ... We can manufacture the mold of any piece that the customer can design

The parts are manufactured on a wooden tray, sized according to machine, from 1.200 x 600 to 1.200 x 1.200 mm.

The trays must be cleaned, oiled, turn them to good performance. The facility performs all this work Rometa automatic.

The number of trays depends on the hours to make each day. The dryer shall be reduced to the production of 1.5 days.

  • The rotation and translation is simultaneous, to reduce the cycle time, achieving reductions between 15 and 20% of the standard finger car.
  • Manufactured aggregates with which you can manufacture slabs, fences and channels of different types and with different techniques for the creation of concrete.
  • The drying of the pieces can become as important as their manufacture, therefore, we believe that it is essential that you have a drying area for the concrete pieces in your factory
  • In this part, we will talk about the importance of humification after drying 24 hours before palletizing.
  • In this part, we offer the reasons why we believe you need a laboratory (forlab) from Rometa in your factory, advising them on what and how to do it
    ROMETA incorporates components from leading brands known worldwide in electrical and hydraulic equipment.
    Our company is certified in accordance to standard UNE-EN ISO 9001:2015 and our facilities meet the safety requirements of European Directive EEC 2006/42 / C.