concrete blocks insulation EPS

EPS insulation blocks (EPS BLOCK)

ROMETA presents the block EPS (EPS blocks) In certain countries, you can make insulated concrete blocks. Insulator is placed in a preform, at an outside table. The second step, with an automatic feeding part is placed within the mold. At the next step, we can manufacture the part normally, compression and release.

  • The rotation and translation is simultaneous, to reduce the cycle time, achieving reductions between 15 and 20% of the standard finger car.
  • Manufactured aggregates with which you can manufacture slabs, fences and channels of different types and with different techniques for the creation of concrete.
  • The drying of the pieces can become as important as their manufacture, therefore, we believe that it is essential that you have a drying area for the concrete pieces in your factory
  • In this part, we will talk about the importance of humification after drying 24 hours before palletizing.
  • In this part, we offer the reasons why we believe you need a laboratory (forlab) from Rometa in your factory, advising them on what and how to do it
    See all news
    Products
    About Rometa
    Quality
    ROMETA incorporates components from leading brands known worldwide in electrical and hydraulic equipment.
    Our company is certified in accordance to standard UNE-EN ISO 9001:2015 and our facilities meet the safety requirements of European Directive EEC 2006/42 / C.

    © ROMETA SA